Wires Pack for HartK Stealthburner Toolhead PCB (Crimped and Loaded Wires)

Toolhead PCB Pre-Crimped Wires Pack

This pack of wires is intended to ease the challenge of crimping JST-PH and Molex Microfit wire pins when assembling a Stealthburner Toolhead PCB.

All wire included in this pack is PVC jacketed, stranded copper conductors rated for maximum use at 105C and 300V.

Included:

• 20 pieces: ~6" 28 AWG (UL 1569) wires with JST-PH crimps
• 16 pieces are loaded in connectors sufficient to fill every matching socket on the pcb
• 4 pieces are included as spares with three extra connectors
• 2 pieces: ~6" 28 AWG (UL 1569) wires with Molex Microfit crimps loaded in a 1x2 Microfit connector for the thermistor
• 2 pieces: ~6" 20 AWG (UL 1007) wires with Molex Microfit crimps loaded in a 1x2 Microfit connector for the heater cartridge

Not Included:

• Hardware for splicing to hardware wires.
• Instructions.

Product Support

This item lacks a specific warranty, however it should arrive free of defect.  Please let us know if problems are encountered or if you have recommendations for similar wire products.